| -
Specifications - Dapco
Industry's Plain End
Casing Inspection System |
Range
of
product tested |
5-1/2 to 9-5/8 inches (140 to 244.5 mm) |
| Wall Thickness |
0.157 to 0.787 inches (4 to
20
mm) |
| Sensitivity |
ID and OD notches at 5% of nominal wall
thickness |
| Performance |
Meets or exceeds all API and Private Oil
company specifications |
| Inspection speed |
Cycle test time less than 26 seconds |
| Mode of inspection |
The entire pipe rotates through three
fixed position test heads |
| Area covered |
100% in five directions at 100 mm per
revolution of the pipe |
| Electronics |
39 microprocessor controlled, ultrasonic data
channels; 3 for control and 36 for data collection, all operating simultaneously in a
parallel processing mode |
| Defect inspection |
ID/OD longitudinal and transverse
cracks, laminations and thickness variations |
